3D print the Europaturm
A free, printable model of the Europaturm in Frankfurt, Germany, with the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 338 m
- On a 160 mm print
- 91 mm
- Scale
- 1:3,750
338 m of the Europaturm, 91 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Mast and antenna
The antenna and the narrow shaft above the tower are the most fragile parts of the silhouette. Print friendly adapts them at small sizes; Full detail keeps them for a larger print or a finer nozzle.
- Layers up the shaft
The tower is tall and slim, so print it slowly with cooling. Layers of 0.12–0.16 mm keep the shaft and the antenna crisp.
- One piece with the ground
The Europaturm is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Europaturm takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Europaturm
Frankfurt's Europaturm, whose name means Tower of Europe, is a telecom tower 337.5 m (1,107 ft) tall. Erwin Heinle was its architect, and work started in 1974. When it was finished five years later it became the Federal Republic of Germany's tallest free-standing structure. At 331 m (1,086 ft) it was Germany's second tallest structure, behind the Fernsehturm Berlin, which reaches 368 m (1,207 ft).
Without its antenna, the building still rises more than 295 m (968 ft), which gives it Germany's highest roof level. The base is 59 m (194 ft) thick and is wider than that of any similar structure anywhere. A turning top gives views over the Rhine Main area. For some years a restaurant and discotheque occupied the upper part, but visitors have been kept out since 1999.
A new antenna went up in September 2004, lifting the total height to 337.5 m (1,107 ft); it arrived by helicopter in two pieces and weighed six tons. T-Systems, a Deutsche Telekom subsidiary, owns and runs the tower and lights it magenta after dark, the company's corporate color. Locals nickname it the Ginnheimer Spargel, or Ginnheim asparagus, even though the Bockenheim district, not Ginnheim, is its home.
About this model
The Europaturm is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
