3D print Fallingwater
A free, printable model of Fallingwater and the green grounds, stream and roads around it in southwestern Pennsylvania, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long, thin cantilevered terraces
Flat terraces stack up and jut out sideways over the piers below. Print friendly adapts the thinnest slabs to the print scale, and a larger print gives the overhangs more thickness.
- A small house, a big site
The house is small next to the open grounds around it. A larger print size keeps the stonework and the rows of window frames readable; layers of 0.12 to 0.16 mm help.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fallingwater takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Fallingwater
In Stewart Township, in southwestern Pennsylvania's Laurel Highlands, Fallingwater is a house museum. Frank Lloyd Wright designed it, and it is built partly above a waterfall in the stream called Bear Run. Edgar J. Kaufmann Sr. and his wife Liliane had the three-story house built as a weekend retreat; he owned Kaufmann's Department Store in Pittsburgh. The Western Pennsylvania Conservancy operates the house as a tourist attraction and looks after 2,000 ha (5,000 acres) around it.
Kaufmann had set up a summer retreat for his employees at Bear Run by 1916. After they stopped using it, the Kaufmanns purchased the land in July 1933 and commissioned Wright in 1934. Construction ran into structural trouble, such as cracked concrete and terraces that sagged. The family first used the house in 1937, and a guest wing designed by Wright was finished in 1939. Renovation work between the late 1990s and the early 2000s repaired major structural defects, among them the sagging terraces and poor drainage.
Several terraces are cantilevered, reaching outward from a chimney with no support at the far end. Its materials are plate glass, steel, reinforced concrete and stone quarried nearby. The first story holds the main entrance, living room, kitchen and two outdoor terraces, while the upper stories add four bedrooms, one of them a study, and more terraces. A guest wing above it holds a carport and quarters for servants. The house is a National Historic Landmark, and one of eight Frank Lloyd Wright buildings listed together as a World Heritage Site.
About this model
Fallingwater is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
