3D print American Family Field
A free, printable 3D model of American Family Field, the Milwaukee Brewers ballpark, with the surrounding streets and buildings built from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 28 mm
- Scale
- 1:3,750
28 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fan-shaped roof of arched ribs
The fan roof is modeled as a set of slim arched ribs above the bowl, and those ribs are the finest shapes here. Print friendly adapts them at small scale; a larger print with Full detail keeps each one separate.
- One piece with the ground
American Family Field is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. American Family Field takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About American Family Field
American Family Field is a stadium in Milwaukee, Wisconsin, with a retractable roof. Its site lies southwest of where Interstate 94 meets Brewers Boulevard. The Milwaukee Brewers of Major League Baseball play there, and the park opened in 2001 as Miller Park, replacing Milwaukee County Stadium. Its fan-shaped convertible roof is the only one of its kind in North America and opens or closes in under ten minutes. Large panes of glass let natural grass grow inside, helped by heat lamp structures that are wheeled across the field in the off-season.
The stadium was among the largest building projects in Wisconsin's history. Groundbreaking came on November 9, 1996, in a lot behind the old County Stadium. The opening was due in 2000, but the schedule slipped after three workers were killed on July 14, 1999, when a crane lifting a 450-ton roof section collapsed in windy conditions. The park finally opened in 2001, having cost $392 million, and carried the name Miller Park under a $40 million deal with Miller Brewing Company that expired at the end of 2020; American Family Insurance then bought the rights for 15 years.
The unusual roof has needed repairs. After the 2006 season its bogies were replaced, at more than $13 million, with ten new ones installed, and the job was done before the 2007 season began. The 2006 season also brought two sets of LED scoreboards and a picnic area at field level in the right-field corner, with room for 75.
About this model
American Family Field is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
