3D print Fontainebleau Las Vegas
A free, printable model of Fontainebleau Las Vegas, a curved tower on a wide podium, and the buildings and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Fontainebleau Las Vegas
Fontainebleau Las Vegas is a luxury casino resort in Winchester, Nevada, along the Las Vegas Strip. Fontainebleau Miami Beach is its sister property. The resort stands on a site of 24.5 acres (9.9 ha) that the Algiers Hotel and the El Rancho Hotel and Casino occupied earlier. Carlos Zapata Studio designed the project, and Bergman Walls and Associates served as executive architect. Work began in February 2007. On November 14, 2008, the hotel tower was topped off, with 67 stories and a height of 224.6 m (737 ft).
The project ran into trouble in 2009. Fontainebleau sued a group of banks in April 2009 after they cut off funding, and two months later the project entered Chapter 11 bankruptcy, putting construction on hold. The resort was 70 percent complete, with an opening scheduled for October 2009. Carl Icahn bought it from bankruptcy in 2010 but did not resume building.
Seven years after that, Witkoff Group and New Valley LLC, both investment firms, bought the unfinished resort, intending to launch it under the name The Drew Las Vegas. In March 2020 the COVID-19 pandemic in Nevada halted construction. Jeff Soffer, who owned the original developer, bought the project back in February 2021 via Fontainebleau Development, his company, with Koch Real Estate Investments joining as a partner. He restored the original name, and construction restarted in November 2021. The finished resort cost $3.7 billion and opened on December 13, 2023, with 3,644 hotel rooms and a casino of 16,100 m2 (173,000 sq ft).
How it prints
Make this print opens the generator on a 850 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 44 mm | 1:5,313 |
| 200 mm | 55 mm | 1:4,250 |
| 256 mm | 70 mm | 1:3,320 |
-
North
-
East
-
South
-
West
- Curved tower and fine facade lines
- The tower is a tall curved shape covered in a dense grid of window lines, which Print friendly adapts to the print scale and Full detail keeps on larger prints. Layers of 0.12–0.16 mm keep the facade crisp.
- Wide podium roof
- The low podium around the tower has a roof with small rooftop details. A larger print size keeps more of them, and slower printing helps them come out cleanly.
- One piece with the ground
- Fontainebleau Las Vegas is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fontainebleau Las Vegas takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Fontainebleau Las Vegas is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Fontainebleau Las Vegas STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Fontainebleau Las Vegas grows with the print: about 44 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
