3D print Fremantle Prison
A free, printable model of the long cell block and wings of Fremantle Prison, and the lawns, roads and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Fremantle Prison in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long roofs with small chimneys
The long cell block roofs carry small chimney-like tips along their ridges. Print friendly adapts these small details to the print scale; Full detail keeps them on a larger print.
- Rows of narrow windows
The walls have many small windows. A larger print size and a 0.12-0.16 mm layer height keep them crisp.
- One piece with the ground
Fremantle Prison is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fremantle Prison takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Fremantle Prison
Fremantle Prison, a former Australian prison, stands in Fremantle in Western Australia and is listed as a World Heritage Site. The complex takes in the cellblocks, the gatehouse, perimeter walls, cottages and tunnels. Its first inmates were convicts transported from Britain, and in 1886 it passed to the colonial government to hold locally sentenced prisoners. The prison closed in 1991 and was replaced by the maximum-security Casuarina Prison.
The prison occupies a land grant of roughly 15 hectares (36 acres) and was built from limestone quarried on the site. A boundary wall 4.6 meters (15 ft) tall encloses the grounds, with the gatehouse in the middle of the western wall, looking onto The Terrace. Convict labor built the gatehouse between 1854 and 1855 to a design by Edmund Henderson, a Royal Engineer who was also Comptroller General; a narrow gate flanked by two towers recalls English castles and walled cities from the 13th century.
Convicts also built the Main Cell Block in the 1850s, planning it to hold up to 1000 prisoners. A four-story cell block stands at the center, with large dormitory wards, the Association Rooms, at each end, while each cell was a mere 2.1 by 1.2 meters (7 by 4 ft). Two chapels, one Anglican and one Catholic, are inside. The New Division was built between 1904 and 1907 to relieve overcrowding. Since 1991 the site has been conserved as a heritage site and has become a significant tourist attraction.
About this model
Fremantle Prison is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





