3D print the Friedrichstadt-Palast
A free, printable 3D model of the Friedrichstadt-Palast and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Friedrichstadt-Palast in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Large block, small details
This is a broad building, so a larger print size keeps small details. Print friendly adapts thin parts to the print scale, while Full detail keeps every modeled feature.
- One piece with the ground
The Friedrichstadt-Palast is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Friedrichstadt-Palast takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Friedrichstadt-Palast
The Friedrichstadt-Palast, also called Palast Berlin, is a revue theater on Friedrichstraße in Berlin's Mitte district; the name covers both the building and the ensemble that performs in it. The present house opened on April 27, 1984. It replaced the Old Friedrichstadt-Palast near Schiffbauerdamm, which was demolished in 1985. The new building is 80 meters (260 ft) wide by 110 meters (360 ft) long, and its concrete design carries over some ideas from the old vestibule beneath a new contemporary façade.
The institution's roots lie in a market hall built from 1865 to 1867, about 200 meters southwest of the present site. In 1873 that building became a circus arena, and Max Reinhardt later had the architect Hans Poelzig rebuild it as a theater for classic plays. The old house was closed on February 29, 1980, because of strong subsidence of the foundation.
The large hall seats 1,895 people. The stage floor covers 2,854 square meters, which is the largest in the world, and the proscenium arch, at 24 meters (79 ft) wide, is the widest in Europe. Four reliefs by sculptor Emilia N. Bayer, three on the southern wall and one on the northern, look back at the Palace's past as a circus, a theater and a vaudeville house.
About this model
The Friedrichstadt-Palast is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
