3D print the Gazi Atik Ali Pasha Mosque
A free, printable model of the Gazi Atik Ali Pasha Mosque and the streets and buildings around it in Istanbul's Fatih district, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A mosque at city scale
Print this mosque larger so the entrance and roofline read clearly, and use 0.12–0.16 mm layers for the fine edges.
- One piece with the ground
The Gazi Atik Ali Pasha Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Gazi Atik Ali Pasha Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Gazi Atik Ali Pasha Mosque
The Gazi Atik Ali Pasha Mosque is a 15th-century Ottoman mosque in the Çemberlitaş neighborhood of the Fatih district, Istanbul, Türkiye. Its construction began in 1496 on the orders of Hadım Atik Ali Pasha, then the future Grand Vizier, and it was finished in 1497, while Sultan Bayezid II was on the throne.
Close by are the Grand Bazaar entrance, the Column of Constantine and the historic Nuruosmaniye Mosque. The mosque is known in Turkish as Gazi Atik Ali Paşa Camii, follows Ottoman architecture, and is recorded as a mosque and as a historic building. It stands in the Fatih district of Istanbul.
About this model
The Gazi Atik Ali Pasha Mosque is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
