3D print Geology Hall, New Brunswick, New Jersey
A free, printable 3D model of Geology Hall and the lawns, paths and campus buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Geology Hall, New Brunswick, New Jersey
A historic Rutgers University building on the Queens Campus in New Brunswick, New Jersey, Geology Hall is also called Geological Hall. Its address, 85 Somerset Street, places it next to Old Queens and Van Nest Hall. Construction ran from April 1871 to June 1872, and the hall was meant to hold classes in the sciences along with the Rutgers Geology Museum.
Henry Janeway Hardenbergh designed and built the hall in stone. He had intended it to be brick, but late in planning it was decided to use stone. Its National Register of Historic Places nomination describes the style as drawing on both Gothic elements and classical forms. As completed in 1872, it had a first floor of laboratories, upper floors for the geological museum and a basement armory serving the college's military school.
George Hammell Cook, Rutgers' geology professor at the time, founded the museum in 1872 around specimens whose collection began in the 1830s. In 1875, Princeton students stole 25 muskets from the armory in retaliation for Rutgers students taking a cannon from Princeton. The hall joined the New Jersey and National Registers of Historic Places in 1973, in the historic district called Old Queens Campus.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 5 mm | 1:3,750 |
| 200 mm | 7 mm | 1:3,000 |
| 256 mm | 8 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Arched windows and dormers
- Rows of arched windows, small dormers and gables decorate the walls and roof. This is a small building, so Full detail on a larger print keeps them; Print friendly simplifies the smallest ones.
- Chimneys and roof finials
- The steep roof carries thin chimneys and finials. Print slowly with a layer height of 0.12 to 0.16 mm so these thin parts stay clean.
- One piece with the ground
- Geology Hall, New Brunswick, New Jersey is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Geology Hall, New Brunswick, New Jersey takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Geology Hall, New Brunswick, New Jersey is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Geology Hall, New Brunswick, New Jersey STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Geology Hall, New Brunswick, New Jersey grows with the print: about 5 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
