3D print Getafe Cathedral
A free, printable model of Getafe Cathedral, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small cathedral at default size
Getafe Cathedral is small at the default print size, so a larger print gives its details more room to read.
- One piece with the ground
Getafe Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Getafe Cathedral takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Getafe Cathedral
The Cathedral of Saint Mary Magdalene is a Roman Catholic cathedral in Getafe, Spain. For most of its existence the building was a church, and it became a cathedral in 1995 after the Diocese of Getafe was established. Its Spanish name is Catedral de Santa Maria Magdalena. The cathedral is protected as a bien de interés cultural.
Its architects were Juan Gómez de Mora and Alonso de Covarrubias. Construction began in the 16th century and was finished in 1770. The bell tower is a survival from an earlier building of the mid-14th century and is Mudéjar in style, while the body of the cathedral is predominantly Renaissance or Baroque.
About this model
Getafe Cathedral is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
