3D print Gooderham Building
A free, printable 3D model of the Gooderham Building in Toronto and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Gooderham Building in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Narrow corner and roof detail
A narrow building has fine features at its corner and along the roof. Print friendly adapts them to the print scale; a larger print or Full detail keeps more.
- One piece with the ground
Gooderham Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Gooderham Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Gooderham Building
Also called the Flatiron Building, the Gooderham Building is a historic office block at 49 Wellington Street East, Toronto, Ontario. It occupies the wedge where Front Street and Wellington Street come together in a triangular intersection, in the St. Lawrence neighborhood on the Financial District's eastern edge. Finished in 1892, this red-brick building was one of the early flatiron buildings, and a prominent one. The view west along Front Street toward its rounded corner appears often in images of the city.
David Roberts Jr. designed it, at an original cost of $18,000, for the distiller George Gooderham Sr. Gooderham and Worts, the distillery, kept its offices in the building until 1952, and the family sold it in 1957. The site previously held a shorter building of the same shape, known as the Coffin Block. The Ontario Heritage Act designated it a historic site in 1975.
Two features stand out: its narrow wedge shape and a mural on the rear wall. Derek Michael Besant painted the Flatiron Mural in a trompe-l'œil manner, and it shows the Perkins Building across the street. Above the arched windows of the fourth floor runs a Romanesque cornice and frieze, and the main entrance on Wellington Street has a French Gothic archway. Its foundation is sandstone, and a steep copper roof carries eight gable dormers.
About this model
Gooderham Building is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
