3D print the Green Point Lighthouse
A free, printable model of the Green Point Lighthouse, a square tower with a railed gallery and small lantern, with the grass and roads around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Green Point Lighthouse in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 16 m
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
16 m of the Green Point Lighthouse, 5 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin railing and lantern
A thin railing circles the gallery and a small lantern sits above it. Print friendly adapts these thin parts; Full detail keeps them on a larger print, and printing slowly with cooling helps.
- One piece with the ground
The Green Point Lighthouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Green Point Lighthouse takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Green Point Lighthouse
The Green Point Lighthouse is a lighthouse on the South African coast, standing on Mouille Point in Cape Town. It was first lit on April 12, 1824. It was the earliest solid lighthouse built on the South African coast, and it is South Africa's oldest operational lighthouse.
Sir Rufane Shaw Donkin, acting Governor of the Cape Colony, commissioned the lighthouse, and the German architect Herman Shutte designed it. Construction started in 1821 and finished in 1823. It cost approximately £6,420. The work was held up for a time because Lord Charles Somerset, the official governor, had not been consulted and halted the project. In 1865 the lighthouse was expanded to the height it keeps. It was certified a Provincial heritage site on January 12, 1973.
The first lamps were Argand lamps burning sperm whale oil, and their light carried 6 nautical miles, or 11 km (6.9 mi). In 1922, 3rd order dioptric flashing lights extended the range to 22 nautical miles. The light is white, flashing every 10 seconds. A foghorn was added in 1926, and local residents call the lighthouse "Moaning Minnie".
About this model
The Green Point Lighthouse is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline


