3D print Greenland Group Suzhou Center
A free, printable model of the Greenland Group Suzhou Center in Suzhou, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 358 m
- On a 160 mm print
- 96 mm
- Scale
- 1:3,750
358 m of Greenland Group Suzhou Center, 96 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall, detailed shaft
A supertall tower puts its facade in a long vertical run, and the window lines are the finest part. A larger print or Full detail keeps them crisp.
- One piece with the ground
Greenland Group Suzhou Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Greenland Group Suzhou Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Greenland Group Suzhou Center
The Greenland Group Suzhou Center, a supertall skyscraper by the Greenland Group, stands in Suzhou, China. The tower rises 358 meters (1,174.5 ft). Work on the tower began in 2014 and finished in 2025. Skidmore, Owings, and Merrill designed it.
A center atrium divides the building's interior into an east room and a west room, a layout intended to improve the tower's ventilation. Thirty floors have operable windows. The tower has 75 floors above ground and stands in the Wujiang District of Suzhou.
About this model
Greenland Group Suzhou Center is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
