3D print the Tiger Hill Pagoda
A free, printable model of the Tiger Hill Pagoda in Suzhou, a tall tiered tower on a green hill with roads, small buildings and water around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tiger Hill Pagoda in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 47 m
- On a 160 mm print
- 17 mm
- Scale
- 1:3,750
47 m of the Tiger Hill Pagoda, 17 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tapering tower
The pagoda is a tall, narrow stack of tiers. Print slowly with good cooling so the upper tiers hold their shape, and use Print friendly so thin eaves survive at small sizes.
- Many small eaves
Each tier has small projecting eaves. Full detail with a larger print size keeps them all, and a layer height of 0.12–0.16 mm keeps the tier edges crisp.
- One piece with the ground
The Tiger Hill Pagoda is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tiger Hill Pagoda takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tiger Hill Pagoda
The Tiger Hill Pagoda, also called the Huqiu Pagoda and officially the Yunyan Temple Pagoda, stands on Tiger Hill (Huqiu) in Suzhou, in Jiangsu Province, eastern China. People nickname it the 'Leaning Tower of China'. It is 47 m (154 ft) high, has seven stories and an octagonal plan, and its masonry was designed to imitate the wooden pagodas common when it was built.
It is the main pagoda of the former Yunyan Temple, founded in 327 and last refurbished in 1871 following the Taiping Rebellion. Work on the pagoda started in 907, in the Five Dynasties period between the Tang and Song dynasties, and ended in 961. The top stories were added during the Chongzhen Emperor's reign (1628–1644), the last Ming emperor.
The tower's top sits 2.32 meters off from its bottom, and it leans roughly 3 degrees because two supporting columns cracked. Its foundation began as half rock and half soil. Efforts to stabilize the pagoda were made in 1957, and a stone casket holding Buddhist scriptures turned up during the reinforcement, with an inscription dating the pagoda's completion to 961, the Jianlong Era's 2nd year.
About this model
The Tiger Hill Pagoda is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





