3D print the Grunewald Tower
A free, printable model of the Grunewald Tower and the forest around it in southwestern Berlin, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 55 m
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
55 m of the Grunewald Tower, 15 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall brick tower
The tower rises far above its base. A larger print and 0.12–0.16 mm layers keep the shaft crisp; print slowly for the upper section.
- One piece with the ground
The Grunewald Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Grunewald Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Grunewald Tower
The Grunewald Tower is a historic tower in Berlin's Grunewald forest, in the southwest of the city. It was built from 1897 to 1899 to plans by Franz Heinrich Schwechten. The district of Teltow commissioned it as a memorial to mark the 100th birthday of Emperor Wilhelm I, and it opened on June 9, 1899 as the Kaiser-Wilhelm-Turm.
The tower stands 55 m (180 ft) high in Brick Gothic Revival style, on the 79 m (259 ft) Karlsberg hill above the eastern shore of the Havel. A domed memorial hall holds a marble statue by Ludwig Manzel of Wilhelm I and four iron reliefs. Mosaics by August Oetken decorate the ceiling. A staircase of 204 steps leads to a viewing platform. The platform, at 36 m (118 ft), looks out over the Havel.
In 1948 the tower took the name Grunewaldturm, after the forest around it. A renovation followed in 1953, and a later closure in October 2007 was due to damage to the staircase; the work cost 1.5 million euros and ran until 2011. The tower has also served as a cell tower since the 1990s.
About this model
The Grunewald Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
