3D print the Gwalior Airport New Terminal

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Copper roof and portico

   The wide roof has a thin projecting edge above an open entrance portico with round bastions. Print friendly adapts the thin fascia and piers; Full detail keeps them for a large print.

2. Glazed entrance bays

   Four tall glazed bays sit behind the portico, divided by fine mullions. Use 0.12–0.16 mm layers and a larger print to keep the glazing bars and the relief frieze readable.

3. One piece with the ground

   The Gwalior Airport New Terminal is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Gwalior Airport New Terminal takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.