3D print Heston Aerodrome historic hangar
A free, printable model of the arched hangar at Heston Aerodrome and the buildings and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Heston Aerodrome historic hangar
Heston Aerodrome was an airfield west of London, England, in use from 1929 to 1947. It lay where the Heston and Cranford districts of Hounslow, Middlesex, meet. Nigel Norman and Alan Muntz, pilots and co-owners of aircraft, conceived it in 1928, and their new company, Airwork Ltd, constructed it.
The field was officially opened on July 5, 1929, timed to match a King's Cup air race, a two-day event, hosted there. A concrete hangar and concrete aprons were in place from the start, reported as a first in the UK. One claim says the central building was the earliest control tower built for the purpose at any airport, and the basis of modern towers.
In September 1938, Prime Minister Neville Chamberlain of Britain made three flights from Heston to Germany within two weeks to talk with Adolf Hitler. He flew back into Heston after the Munich Conference, holding the paper that figured in his later speech from 10 Downing Street. In 1937 the Air Ministry bought the airport, which became the second airport serving London at that point.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 4 mm | 1:3,750 |
| 200 mm | 5 mm | 1:3,000 |
| 256 mm | 6 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A curved barrel roof
- The hangar's big arched roof carries skylight strips and a small stair. Print friendly adapts these small parts; a larger print and 0.12 to 0.16 mm layers keep the curve smooth.
- One piece with the ground
- Heston Aerodrome historic hangar is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Heston Aerodrome historic hangar takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Heston Aerodrome historic hangar is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Heston Aerodrome historic hangar STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Heston Aerodrome historic hangar grows with the print: about 4 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
