3D print the Hotel Galvez
A free, printable 3D model of the Hotel Galvez in Galveston, Texas, with its turrets and surrounding streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hotel Galvez in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Four corner turrets
Four domed hexagonal turrets frame the raised central pavilion, with thin lantern openings below the caps. Print friendly adapts the small turret parts; Full detail is better for a large print or fine nozzle.
- Open porches and balconies
The north porte cochere and the Gulf-side veranda are carried on slender supports. Print slowly with good cooling, and use 0.12 to 0.16 mm layers for the balcony rails.
- One piece with the ground
The Hotel Galvez is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hotel Galvez takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hotel Galvez
Hotel Galvez, also called the Grand Galvez Resort & Spa, began welcoming guests in 1911 and has 226 rooms in Galveston, Texas. Its name honors Bernardo de Gálvez, the first Viscount of Galveston and the figure behind the city's name. The National Register of Historic Places listed the hotel on April 4, 1979.
Stucco-covered brick forms the six-story building, whose style is Spanish Colonial Revival. The walls are plastered, the roof uses Ludowici tiles, and mission parapets edge the roofline. Two five-story wings reach toward the Gulf of Mexico with round arches and Spanish Revival windows, while the original main entrance, beneath a porte cochere, faced north away from the water.
About this model
The Hotel Galvez is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
