3D print the House of Soviets (Saint Petersburg)
A free, printable 3D model of the House of Soviets in Saint Petersburg and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
House of Soviets (Saint Petersburg) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Layer height for small details
A layer height of 0.12–0.16 mm keeps small details crisp. Print friendly adapts thin parts at small sizes; Full detail suits large prints.
- One piece with the ground
The House of Soviets (Saint Petersburg) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The House of Soviets (Saint Petersburg) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the House of Soviets (Saint Petersburg)
The House of Soviets, an office building of the Stalinist style, went up in Saint Petersburg's Moskovsky District (then Leningrad) during the late 1930s. One description calls it "the purest form of totalitarian monumentality". It was meant to house the Soviet Leningrad government's administration, and the site was chosen on the undeveloped southern outskirts, away from downtown, where floods were frequent.
Construction was finished on the eve of World War II, when Nazi forces invaded the Soviet Union, and it never served its intended purpose. Fortified in 1941, it became a local command post of the Red Army while Leningrad was besieged; small reinforced concrete bunkers still stand at several corners. Later it housed a Soviet research institute that designed electronic components for military objects. Engineers there included Alfred Sarant and Joel Barr, two defectors from the US after World War II.
A square in front of the building is called Moscow Square. When the Moskovskaya subway station was built in 1970, the square was remodeled and given a massive Lenin monument designed by Mikhail Anikushin. Fountain features were added in 2006.
About this model
The House of Soviets (Saint Petersburg) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
