A white 3D print of the Idaho Falls Idaho Temple, a tiered building with a tall central spire, set among lawns, roads and a wide river.

Idaho Falls Idaho Temple in 3D

The Idaho Falls Idaho Temple appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Idaho Falls Idaho Temple model, North view North
  • Idaho Falls Idaho Temple model, East view East
  • Idaho Falls Idaho Temple model, South view South
  • Idaho Falls Idaho Temple model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Idaho Falls Idaho Temple may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
13 mm
Scale
1:3,750

13 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender central spire

    The tapered tower and spire rise well above the low wings around them. Print it slowly with good cooling, use a 0.12–0.16 mm layer height, and try Full detail on a larger print.

  2. One piece with the ground

    The Idaho Falls Idaho Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Idaho Falls Idaho Temple takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Idaho Falls Idaho Temple

In Idaho Falls, Idaho, beside the Snake River, stands a Latter-day Saints temple, the tenth the church constructed and its eighth operating one. It was the first temple built in Idaho and the first of the church's temples to use a modern single-spire design.

Six architects sat on the church board of temple architects (Lorenzo Snow Young, Hyrum Pope, John Fetzer, Ramm Hansen, Georgious Y. Cannon and Edward O. Anderson), and each submitted a design. The one chosen was Fetzer's, which drew on the Book of Mormon. Groundbreaking took place on December 19, 1939. The exterior was finished in September 1941, but World War II shortages delayed the rest for four more years, and George Albert Smith dedicated the temple on September 23, 1945.

Two stories tall, the temple is built of white quartz, cast stone and concrete. Its exterior has a center spire and tapered tower, while hand-painted murals and stained glass fill the interior. The grounds include pine trees, flower gardens and ponds with waterfalls. In 1983 it became the first temple to get an angel Moroni statue added after it had already been dedicated, and it was rededicated on June 4, 2017.

About this model

The Idaho Falls Idaho Temple is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits