A white 3D print of the Illinois State Capitol, a cross-shaped building with a tall ribbed dome and thin spire, standing on a lawn with streets and larger buildings around it.

3D print the Illinois State Capitol

A free, printable model of the Illinois State Capitol in Springfield, with its tall central dome and spire and the lawns and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Illinois State Capitol model, North view North
  • Illinois State Capitol model, East view East
  • Illinois State Capitol model, South view South
  • Illinois State Capitol model, West view West

© OpenStreetMap contributors

The model you print

Illinois State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
110 m
On a 160 mm print
33 mm
Scale
1:3,750

110 m of the Illinois State Capitol, 33 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall dome and thin spire

    The ribbed dome, its colonnaded drum and the slim spire on top are the most delicate parts. Print the upper section slowly with good cooling, and use a 0.12 mm layer height to keep the spire crisp.

  2. Small cupolas and columns

    The little cupolas beside the dome and the columns on the porticoes are fine details. Use Full detail on a larger print to keep them, or Print friendly to adapt them to the print scale.

  3. One piece with the ground

    The Illinois State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Illinois State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Illinois State Capitol

The Illinois State Capitol in Springfield is home to the legislature and the executive branch of Illinois. Illinois joined the United States in 1818, and this is its sixth capitol building; the legislature has sat here since 1876. Cochrane and Garnsey, a design firm based in Chicago, drew it up in the French Renaissance and Italianate styles. The groundbreaking took place on March 11, 1868. After twenty years of work the building was complete, at $4.5 million in all.

The capitol reaches 361 feet (110 m), and 405 feet (123 m) with its flagpole added, which makes it the tallest capitol structure in the United States that is not a skyscraper. The dome measures 92.5 ft (28.2 m) across and is carried by solid bedrock lying 25.5 ft (7.8 m) beneath the ground. The building stands on a nine-acre plot, and its footprint is cross-shaped, with each wing aligned to one of the compass directions.

The two chambers of the General Assembly are inside, along with a ceremonial office for the governor. A zinc alloy covers the tall central rotunda and the roofs of the dome and tower, giving a silvery facade that does not weather or corrode. Inside the dome, a plaster frieze painted to look like bronze shows scenes from Illinois history, and stained glass windows include a replica of the state seal.

About this model

The Illinois State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits