3D print ʻIolani Palace
A free, printable 3D model of ʻIolani Palace in Honolulu, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
ʻIolani Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail on a palace facade
A palace has many small repeated features. Print friendly adapts them to the print scale; Full detail keeps every modeled feature, which suits a larger print or a fine nozzle.
- One piece with the ground
ʻIolani Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. ʻIolani Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About ʻIolani Palace
ʻIolani Palace is in downtown Honolulu, Hawaiʻi, in its capitol district. It was the residence of Hawaiʻi's monarchs, from Kamehameha III in 1845 to Queen Liliʻuokalani in 1893. No other royal palace stands on US soil, and the building is both a National Historic Landmark and a National Register of Historic Places listing.
King Kalākaua, after visiting Europe, wanted a palace worthy of the monarch of a modern state. The earlier palace had suffered ground termite damage, and he ordered it razed. Isaac Moore, Charles J. Wall and Thomas J. Baker all worked on the new design, with Baker designing the structure itself. The cornerstone was laid on December 31, 1879, and the walls are brick with concrete facing.
The monarchy was overthrown in 1893. Until 1969 the building then housed the government, first the Provisional Government, then the Republic, the Territory and the State of Hawaiʻi. Restoration followed, and in 1978 it became a museum open to visitors. The palace faces Aliʻiōlani Hale directly across the street.
About this model
ʻIolani Palace is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
