A white 3D print of the Iowa State Capitol, with a large central dome and four smaller domes, on green lawns with streets and low buildings around it.

3D print the Iowa State Capitol

A free, printable model of the Iowa State Capitol with its central dome and four smaller domes, and the lawns and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Iowa State Capitol model, North view North
  • Iowa State Capitol model, East view East
  • Iowa State Capitol model, South view South
  • Iowa State Capitol model, West view West

© OpenStreetMap contributors

The model you print

Iowa State Capitol in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
25 mm
Scale
1:3,750

25 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Five domes and their lanterns

    The large central dome and the four smaller domes are the delicate parts. Print friendly adapts their thin tops to the print scale; Full detail suits a larger print.

  2. Columned porticoes

    Columns on the porticoes are slim. A layer height of 0.12-0.16 mm keeps vertical detail crisp, and printing a little larger helps the columns stay distinct.

  3. One piece with the ground

    The Iowa State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Iowa State Capitol takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Iowa State Capitol

In Des Moines, Iowa's capital city, stands the Iowa State Capitol, commonly known as the Iowa Statehouse. It serves as home to the Iowa General Assembly: the Senate and the House of Representatives are housed there, and the Governor, the Attorney General, the Auditor, the Treasurer and the Secretary of State all have offices inside. Work ran from 1871 to 1886, and no other capitol in the country has five domes. Its commanding feature is the central dome, a structure of iron and brick sheathed in thin sheets of 23-carat gold.

Its site is East 9th Street and Grand Avenue, atop a hill with a panoramic view of downtown Des Moines and the West Capitol Terrace. Monuments and memorials stand at its sides and front, including the Lincoln and Tad statue. Cochrane and Piquenard were named the architects, and the cornerstone went down on November 23, 1871. Much of the first stone deteriorated from waterlogging and severe weather, so it was replaced, and the cornerstone was laid again on September 29, 1873.

Piquenard worked on the Capitol until his death in 1876, and Mifflin E. Bell then redesigned the dome to fit the proportions of the building. W.F. Hackney was the one architect who remained until the end. Dedication came on January 17, 1884, and the work was finished sometime in 1886 and its final cost was $2,873,294.59. The building is 247 ft (75 m) east to west and 364 ft (111 m) north to south, and its style is a modified and refined Renaissance.

About this model

The Iowa State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits