3D print the Jesuit Church, Vienna
A free, printable model of the Jesuit Church and the surrounding streets and buildings of central Vienna, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Jesuit Church, Vienna in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin towers
Twin towers on a church are thin, tall parts. Print friendly adapts thin parts to the print scale; a layer height of 0.12–0.16 mm keeps vertical detail crisp, and printing slowly helps tall thin parts.
- One piece with the ground
The Jesuit Church, Vienna is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Jesuit Church, Vienna takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Jesuit Church, Vienna
The Jesuit Church, also known as the University Church, has two towers and two floors and stands in Vienna, Austria. Its site is Dr. Ignaz Seipel-Platz, right next to the old buildings of the University of Vienna. Early Baroque ideas shaped the church, and Andrea Pozzo remodeled it from 1703 to 1705.
Construction ran from 1623 to 1627 on a site that had held an earlier chapel, at a time when the Jesuits combined their college with the philosophy and theology faculty of the University of Vienna. The church originally had a dedication to Saints Francis Xavier and Ignatius Loyola. In 1703 Emperor Leopold I asked Pozzo, an architect, painter and sculptor, to redecorate it. He gave it twin towers and gave the facade a new design in an early Baroque style of narrow horizontal and vertical sections. Pozzo died in 1709 and found his grave inside the church. After the work was done, the church received a new dedication, to the Assumption of Mary.
Its exterior is fairly austere, yet inside it is richly decorated, with ersatz marble pillars, gilding and allegorical ceiling frescoes. Pozzo painted the trompe-l'œil dome in 1703 on a flat section of the ceiling, and it is regarded as a masterpiece. Next to the church is the Aula, the university's great hall, where Beethoven's Seventh Symphony was first performed.
About this model
The Jesuit Church, Vienna is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
