A white 3D print of the Juma-Jami Mosque, with a central dome, smaller domes and two tall minarets, beside a road and a green park with paths.

3D print the Juma-Jami Mosque

A free, printable model of the Juma-Jami Mosque, with its dome and two minarets, and the park, roads and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Juma-Jami Mosque model, North view North
  • Juma-Jami Mosque model, East view East
  • Juma-Jami Mosque model, South view South
  • Juma-Jami Mosque model, West view West

© OpenStreetMap contributors

The model you print

Juma-Jami Mosque in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
10 mm
Scale
1:3,750

10 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Two tall minarets

    The two slender minarets with pointed tops are the thinnest parts of the model. Print friendly adapts them to the print scale; print slowly with good cooling.

  2. Dome and small domes

    The central dome sits above a ring of small windows, surrounded by smaller domes. Full detail keeps them on larger prints; 0.12–0.16 mm layers keep the curves smooth.

  3. One piece with the ground

    The Juma-Jami Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Juma-Jami Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Juma-Jami Mosque

The Juma-Jami Mosque, also called the Friday Mosque and in Turkish Cuma Han Camii, is in Yevpatoria, Crimea. Building ran from 1552 to 1564, to a design by the Ottoman architect Mimar Sinan. It is described as the largest mosque in Crimea.

Khan Devlet I Giray founded the mosque in 1552 and commissioned the Istanbul architect Mimar Sinan (1489–1588), chief architect of the Ottoman Empire. Among Sinan's other works in Istanbul are the Şehzade Mosque and the Sinan Pasha Mosque. The work took a long time. Sinan was meanwhile busy with the Süleymaniye Mosque in Istanbul, which had financial difficulties of its own because money was going to a war with Ivan the Terrible.

Over the years the building was embellished further. It was rebuilt from 1740 to 1743, when its main building was restored, and between 1758 and 1769 the western façade was decorated with paintings. The mosque is built of limestone, and those paintings date from this later period.

About this model

The Juma-Jami Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits