3D print Boris and Gleb Church, Kideksha
A free, printable model of the Boris and Gleb Church in Kideksha, a compact church with a small onion dome and three rounded apses, set on open grassy ground, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Boris and Gleb Church, Kideksha in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small onion dome and cross
A single small onion dome with a thin cross sits on a drum above the roof. Choose Full detail on a large print to keep the cross, and print slowly so the tip cools.
- Three rounded apses
The three rounded apses at one end are smooth curves. Layers of 0.12-0.16 mm keep them clean, and a bigger print size keeps the arched wall panels visible.
- One piece with the ground
Boris and Gleb Church, Kideksha is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Boris and Gleb Church, Kideksha takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Boris and Gleb Church, Kideksha
The Church of Boris and Gleb stands in Kideksha, a village on the Nerl River four kilometers east of Suzdal. Prince Yuri Dolgoruky commissioned it in 1152. It most likely belonged to his wooden palace complex, yet he used it for just a few years, as he left in 1155 to become Grand Prince of Kiev. Before the Mongols destroyed it, the village was an important town; afterward its importance faded.
Its style follows the Vladimir-Suzdal school. Built of limestone, probably by architects from Galicia, it has four piers and three apses. Among the district's oldest churches, it is also one of few still standing from Dolgoruky's building projects. Some twelfth-century fresco fragments remain. A monastery occupied the site in medieval times, and the church became a parish church afterward.
Over the centuries the building has changed a great deal. Its original vaulting and dome are gone; the present roof and small dome come from the seventeenth century. The apses are believed to be half their first height, and in the nineteenth century a porch was built onto the church. The church is one of the eight "White Monuments of Vladimir and Suzdal" that together make up a UNESCO World Heritage Site, with seven other medieval monuments in and around Vladimir, and it also counts among the sites of Russia's Golden Ring.
About this model
Boris and Gleb Church, Kideksha is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





