3D print Kaknästornet
A free, printable model of the concrete tower, with stacked platforms, a boxy top and an antenna mast, on a green hillside with roads and buildings at its base, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kaknästornet in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 155 m
- On a 160 mm print
- 46 mm
- Scale
- 1:3,750
155 m of Kaknästornet, 46 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin antenna mast on top
A small lattice mast stands on the boxy top of the tower. Print friendly adapts it to the print scale; Full detail keeps it on a larger print. Printing slowly helps the thin tip.
- Stacked platforms
Several railed platforms ring the shaft below the top, with small dishes. A layer height of 0.12–0.16 mm and a bigger print size keep the railings and platform edges crisp.
- One piece with the ground
Kaknästornet is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kaknästornet takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kaknästornet
The Kaknäs tower, Kaknästornet in Swedish, is a telecommunications tower at Ladugårdsgärdet in Stockholm, Sweden. It serves as a major hub for Swedish television, radio and satellite broadcasts. The architect Bengt Lindroos designed it, and it was finished in 1967. It is 155 meters (509 ft) tall, or 170 meters (560 ft) counting the top antenna. The national Swedish broadcasting company Teracom owns it, and the name comes from Kaknäs, the ancient name of the area.
For some years no building in the Nordic countries was taller, until Näsinneula opened in Tampere, Finland, in 1971. The Turning Torso in Malmö surpassed it in 2005. Visitors could once go inside: there was an information center, a gift shop, observation decks indoors and outdoors, and a restaurant. Since 2018 the tower has been permanently closed to the public.
About this model
Kaknästornet is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
