3D print the Kista Science Tower
A free, printable model of the Kista Science Tower, a sharp-cornered tall tower with a thin mast, and the lower wings beside it and the surrounding streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kista Science Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 124 m
- On a 160 mm print
- 43 mm
- Scale
- 1:3,750
124 m of the Kista Science Tower, 43 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A thin mast above the roof
A slender antenna mast rises from the flat crown. Print friendly adapts thin parts like this to your print scale; print slowly so the tall tip stays steady.
- Sharp corners and fine rails
The triangular tower has sharp edges and many fine horizontal and vertical lines on its faces. A layer height of 0.12–0.16 mm keeps them crisp, and a larger print keeps more of them.
- One piece with the ground
The Kista Science Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kista Science Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Kista Science Tower
The Kista Science Tower rises in Kista, in Stockholm, Sweden. Its 32 stories reach 124 m (407 ft), and with the antenna on the roof it measures 156 m (512 ft). Completion came in 2003, when it was Sweden's tallest skyscraper; Malmö's Turning Torso, built in 2005, soon took that title.
Rumors aside, the black cube on the roof is not the start of more floors; it caps the elevator shaft and houses the antenna electronics. A few additional floors were once planned, but the early 2000s recession canceled them, and the shaft that was already built was kept at full height. The elevators are the fastest in Sweden, travelling 5 to 6 meters per second.
Several technology and IT companies occupy the tower. Its neighbors are the Kista metro station and Kista Galleria, a big shopping complex. The architecture firm White designed it, NCC was the main building contractor, and its style is modern architecture.
About this model
The Kista Science Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
