3D print Kamata Station (Tokyo)
A free, printable 3D model of Kamata Station and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kamata Station (Tokyo) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small details at small sizes
Small details can vanish when a print is small. Print friendly adapts thin parts to the print scale, and a larger print size keeps small details.
- One piece with the ground
Kamata Station (Tokyo) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kamata Station (Tokyo) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kamata Station (Tokyo)
Kamata Station (Japanese: 蒲田駅) serves Ōta, in Tokyo, Japan. JR East, the East Japan Railway Company, and Tokyu Corporation, a private railway operator, each run part of it. The lines are the Keihin-Tohoku Line of JR East and the Tokyu Tamagawa and Ikegami lines. Trains of the Tōkaidō Main Line pass along the outer tracks beside the station without stopping.
The JR East part is a surface station whose platforms run north to south, and the Tokyu part sits at the southwest corner of it. JR East opened its station on April 11, 1904. The Tokyu station opened on October 6, 1922, on the Ikegami Line, and the Tamagawa Line began service on November 1, 1923. About 700 m east lies Keikyu Kamata Station, which belongs to the Keikyu Main Line, and Kamata Mosque is also nearby.
About this model
Kamata Station (Tokyo) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
