3D print Kaupanger Stave Church
A free, printable model of Kaupanger Stave Church and the grassy slopes, stream and road around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kaupanger Stave Church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Needle spire and corner spires
A slim central spire and four small corner spires rise from the tower above the stepped roofs. Print slowly with cooling at 0.12–0.16 mm layers, and use Full detail on larger prints to keep the spires.
- One piece with the ground
Kaupanger Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kaupanger Stave Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kaupanger Stave Church
Kaupanger Stave Church is the biggest stave church in Vestland county, Norway. Part of the Church of Norway, it is a parish church in Sogndal Municipality, in Kaupanger village, on the Sognefjorden's northern shore. Built of wood around 1140, in the middle of the 12th century, it has seen use without a break since.
Its nave is carried by 22 staves, the large bearing columns, with eight on each long side and three on each short side. The elevated chancel rests on four free-standing staves. No other stave church has as many staves as this one.
Tree-ring dating shows that the timbers used to build this church were felled in 1137. In the 13th century the nave was lengthened to the west by about 3.5 meters (11 ft). A major reconstruction in 1862, later called a "brutal modernization", added new rows of windows, white paneling and dark roof tiles. A restoration in 1959–1960 undid many of those changes and brought the church back to its 17th-century look.
About this model
Kaupanger Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





