3D print Grip Stave Church
A free, printable 3D model of Grip Stave Church, with its steep shingled roof and slim spire, surrounded by the village buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Grip Stave Church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim spire on a tiny church
The slender spire is the thinnest part of this very small model. Print friendly adapts it to the print scale; Full detail suits a larger print or a fine nozzle. Print slowly with good cooling.
- Steep shingled roof
The steep roof is covered in fine horizontal bands. A layer height of 0.12-0.16 mm keeps them crisp.
- One piece with the ground
Grip Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Grip Stave Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Grip Stave Church
Grip Stave Church is a historic parish church run by the Church of Norway, located in the county of Møre og Romsdal, in Kristiansund Municipality, Norway. It stands in the fishing village of Grip, on a small island about 14 kilometers (8.7 mi) to the northwest of Kristiansund town. An unknown architect built the white wooden church around 1470, in a rectangular stave church style. Its single nave measures 12 m (39 ft) by 6.5 m (21 ft) and stands 6 m (20 ft) high, which places it among the smallest churches in Norway.
The church occupies the highest spot on the island, about 8 m (26 ft) above sea level. It belongs to the Møre type of stave church and resembles in structure the bigger Kvernes and Rødven churches. The island is barren, so the church has no cemetery; the dead were buried elsewhere, for example at Bremsnes Church, more than 10 kilometers (6.2 mi) away across open sea. In 1621 it was heavily modified: some wall sections were reconstructed and a flèche was put on top. In 1814 it served as an election church, one of the polling stations for the elections to the assembly that wrote the Constitution of Norway.
Fresh windows went in during the 1870s, together with a weaponhouse and a sacristy. During a restoration led by John Tverdahl in 1933, it received a new foundation and its exterior walls were paneled. The roof and spire were restored in 2007. The altar, a triptych originating in Utrecht around 1520, has sculptures of the Virgin Mary, Saint Olaf and Saint Margaret, and it survived the Reformation of 1537.
About this model
Grip Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





