3D print the Kenyatta International Convention Centre
A free, printable model of the Kenyatta International Convention Centre and the surrounding streets and buildings of Nairobi's City Square, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Kenyatta International Convention Centre in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 105 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
105 m of the Kenyatta International Convention Centre, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower bands and flat crown
The tower has a faceted shaft of horizontal floor bands under a wide, flat helipad deck. Full detail keeps every band; Print friendly groups them, and 0.12 to 0.16 mm layers keep the deck edge and bands crisp.
- Conical amphitheatre roof
A faceted cone with radial seams and narrow roof lights sits beside the tower on an open undercroft. Print friendly adapts its thin supports; a larger print or a fine nozzle keeps the seams and open bays.
- One piece with the ground
The Kenyatta International Convention Centre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Kenyatta International Convention Centre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Kenyatta International Convention Centre
The Kenyatta International Convention Centre in Nairobi, Kenya, is a 32-story building in the City Square; it was once called the Kenyatta International Conference Centre. It provides space for a number of government offices and is counted among the top conference venues on the continent. The building was commissioned by Jomo Kenyatta, the first President of Kenya, in 1967, and its design is credited to Karl Henrik Nøstvik and David Mutiso.
Construction was carried out in three phases by Solel Boneh & Factah and was completed in 1973, and President Kenyatta presided over the opening ceremony that September. The tower rises to just over 105 meters and contains 32 floors, including a revolving restaurant that makes a full turn in 76 minutes. Its light terracotta facade and simple solid shapes reflect traditional African architecture.
The complex includes a plenary hall built from cuboid forms, a tower shaped as a cylinder of several cuboids, and an amphitheatre and helipad that resemble cones. Its largest conference room can hold more than 6,000 delegates. In September 2013, as the complex marked its 40th anniversary, it was renamed the Kenyatta International Convention Centre. The tower is often depicted as a symbol of Nairobi.
About this model
The Kenyatta International Convention Centre is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
