3D print Ketchaoua Mosque
A free, printable model of Ketchaoua Mosque, a domed building with a long vaulted roof and two front towers, among densely packed buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim towers with domed caps
Two slender towers with small domed caps flank the entrance. Print friendly adapts their thin tips to the print scale; Full detail keeps them, which suits a larger print. Printing slowly helps small tips stay clean.
- Ribbed dome and vaulted roof
The central dome has fine ribs, and a long vaulted roof runs behind it. A layer height of 0.12 to 0.16 mm and a bigger print size keep the ribs crisp.
- One piece with the ground
Ketchaoua Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ketchaoua Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ketchaoua Mosque
Ketchaoua Mosque, also called Djamaa Ketchaoua, stands in Algiers, the capital of Algeria. It was completed in the 17th century, in the Ottoman period. The mosque lies below the Casbah of Algiers, which is a UNESCO World Heritage Site, along the first of the Casbah's steep stairways. It is known for blending Moorish and Byzantine architecture.
A notarial document dates the mosque to 1020 AH (1611/1612 CE), and an inscription records a rebuilding in 1208 AH (1793/1794 CE). In 1832 the building became a Roman Catholic cathedral, the Cathedral of St Philippe, and it served as that until 1962. Between 1845 and 1860 the old building was torn down and replaced by a new cathedral. After Algerian independence in 1962, the new cathedral was turned back into a mosque.
The principal entrance is a flight of 23 steps leading to a portico with ornament, held up by four columns of black-veined marble. Inside are arcades of white marble columns, many of which belong to the original mosque. Two octagonal minarets flank the entrance, decorated in Byzantine and Moorish design. A 2003 earthquake damaged the mosque, which had to close for a time. The Turkish agency for international cooperation and development restored it, and it reopened in April 2018.
About this model
Ketchaoua Mosque is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
