3D print Kuskovo railway station
A free, printable model of Kuskovo railway station and the streets and buildings around it in Moscow, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Layers for clean roof edges
The model is low and wide, so the roof spreads over a large area. Layers of 0.12 to 0.16 mm keep its edges crisp, and a larger print leaves more room for the smallest details.
- One piece with the ground
Kuskovo railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kuskovo railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Kuskovo railway station
Kuskovo is among Moscow's oldest railway stations. It opened in 1861 on the Gorkovsky suburban railway line, and it serves Moscow Central Diameter 4, known as MCD-4. Kuskovo Park lies near the station, and so does the historic Kuskovo Palace.
The station has an overhead pedestrian bridge and two passenger platforms. The station is owned by Moscow Railway. It lies on the border of the Novogireyevo and Veshnyaki districts of Moscow, Russia. Trains on the Gorkovsky suburban line call there.
About this model
Kuskovo railway station is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
