3D print the White House (Moscow)
A free, printable model of the White House in Moscow and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 119 m
- On a 160 mm print
- 33 mm
- Scale
- 1:3,750
119 m of the White House (Moscow), 33 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall block on the base
The building rises as one tall block, and its upper floors are the last to print. Printing slowly with good cooling helps the top stay square.
- Layers for the panel grid
The facades are lined with panels. Layers of 0.12 to 0.16 mm keep the vertical joints crisp; Print friendly adapts the smallest of them at the default size.
- One piece with the ground
The White House (Moscow) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The White House (Moscow) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the White House (Moscow)
The building known as the White House in Moscow, also called the Russian White House, is a government building on the Krasnopresnenskaya Embankment, and it holds the main offices of the Russian government. The prime minister's official workplace is there, and before the name changed it was called the House of Soviets of Russia.
Construction ran from 1965 to 1981; the architect was Dmitry Chechulin, and the building was meant for the People's Control Committee and for the Supreme Soviet of Russia. The plan came from a group of architects at Mosproekt-1, and the building was the first multistory structure to use prefabricated reinforced concrete of one uniform frame profile, with monolithic stiffness cores. Outside, it was lined with claydite concrete panels.
In August 1991 the building was at the heart of the failed coup attempt, the rallying point for those who opposed it; the 1993 constitutional crisis later left it badly damaged, and it was repaired afterward. The complex has a total area of 732,000 square meters, about 132,000 of them office space, with a three-level system of underground floors.
About this model
The White House (Moscow) is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
