3D print the Las Vegas Nevada Temple
A free, printable model of the Las Vegas Nevada Temple, a building with six spires and a steep roof, on open ground among streets and low buildings, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Las Vegas Nevada Temple
The Las Vegas Nevada Temple is a temple of the LDS Church, which counts it as its 43rd operating temple. Gordon B. Hinckley announced it on April 7, 1984. It sits on 4.2 ha (10.3 acres) at the base of Frenchman Mountain, in the Sunrise Manor area near Las Vegas, Nevada. Tate & Snyder designed it in a traditional Latter-day Saint temple style that drew on Nevada's desert landscapes.
A groundbreaking ceremony was held on November 30, 1985, and Hinckley conducted it. Construction began soon after. When the building was finished, tours were open to the public from November 16 to December 9, 1989, and nearly 300,000 people visited. The dedication, led by Hinckley, took place in eleven sessions between December 16 and 18, 1989. It serves church members in southern Nevada and nearby parts of California and Arizona.
Six spires crown the temple, and an angel Moroni statue, ten feet tall, stands atop one of them. White pre-cast stone walls and a copper roof make up the exterior. It has 192 rooms in all, among them six sealing rooms, four ordinance rooms, a celestial room and a baptismal font. Its interior colors are dusty rose, rust and sand, and two large chandeliers hang in the celestial room, where specially cut windows cast rainbows onto the walls.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 12 mm | 1:3,750 |
| 200 mm | 15 mm | 1:3,000 |
| 256 mm | 20 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Six slender spires
- The six slender spires are the most delicate parts of the model. Print friendly adapts thin spires to your print scale; printing slowly with good cooling helps the tips, and Full detail suits larger prints.
- A steep, finely ruled roof
- The tall central roof is ruled with fine horizontal lines. Layers of 0.12 to 0.16 mm keep them crisp, and a bigger print shows more of them.
- One piece with the ground
- The Las Vegas Nevada Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Las Vegas Nevada Temple takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Las Vegas Nevada Temple is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Las Vegas Nevada Temple STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Las Vegas Nevada Temple grows with the print: about 12 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
