3D print LCT The Sharp Landmark Tower
A free, printable model of the Haeundae LCT The Sharp landmark tower, a slender tower with a notched crown, beside the shoreline, water and two neighboring towers, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About LCT The Sharp Landmark Tower
Haeundae LCT The Sharp is a large urban development in Jung-dong, in Haeundae District of Busan, South Korea, facing Haeundae Beach. Its centerpiece is the landmark tower, a 101-floor supertall building of 411.6 m (1,350 ft) that is used as a hotel. Two residential skyscrapers of 85 floors each stand beside it. At the base, an urban entertainment complex holds a shopping mall, a water park and a spa with hot springs.
Inside the landmark tower are luxury hotel rooms, residential hotel units, a convention center and an observatory. The complex was finished and opened on November 30, 2019. The towers rank 2nd to 4th among Busan's supertall skyscrapers, behind Haeundae Doosan We've the Zenith at 301 m (988 ft). The landmark tower ranks second in South Korea, behind Seoul's Lotte World Tower (555 m, or 1,821 ft), and is described as one of the 10 most expensive skyscrapers in the world.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 112 mm | 1:3,750 |
| 200 mm | 140 mm | 1:3,000 |
| 256 mm | 179 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Very tall slender shaft
- The tower is a very tall, slender shaft with a notched crown. Print slowly with good cooling, and use Print friendly to adapt thin parts to the print scale.
- Fine lines and stepped sections
- Fine vertical lines run up the shaft, which steps in at a few heights. Layers of 0.12–0.16 mm keep them crisp, and a larger print size keeps them distinct.
- One piece with the ground
- LCT The Sharp Landmark Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. LCT The Sharp Landmark Tower takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
LCT The Sharp Landmark Tower is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a LCT The Sharp Landmark Tower STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. LCT The Sharp Landmark Tower grows with the print: about 112 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
