Longwood House in 3D
Longwood House appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Longwood House may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small chimneys on the roof
The long, low building has a pitched wing and a few small chimneys. Print friendly adapts these small parts to the print scale; Full detail keeps them, which suits a larger print and a layer height of 0.12-0.16 mm.
- One piece with the ground
Longwood House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Longwood House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Longwood House
Longwood House stands on Saint Helena, a British overseas territory, and was Napoleon Bonaparte's final home. The former Emperor of the French lived there in exile from December 10, 1815 until his death on May 5, 1821. It is a museum that the French government owns, one of two on the island alongside the Museum of Saint Helena.
The site began as a farm owned by the East India Company, and later served as the Deputy-Governor's country home before being converted for Napoleon in 1815. The British government came to see it as unsuitable for Napoleon and his entourage, and had built another house nearby for him by the time he died, though he never lived in it. In 1858 the French government bought Longwood and the Valley of the Tomb for £7,100.
Termite damage led the French government to consider demolishing Longwood in the 1940s. New Longwood and the Balcombe house at The Briars were pulled down then, but Longwood House survived and has been restored by French curators. Only the stone steps at the front remain from the original fabric. Napoleon's will, written at Longwood, is kept in the French National Archives.
About this model
Longwood House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





