3D print Lyra NYC Apartments
A free, printable 3D model of Lyra NYC, a tall residential tower surrounded by streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 47 mm
- Scale
- 1:3,750
47 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Paired volumes and terrace
The paired volumes, raised curtain-wall grid and open roof terrace are the finest details. Print larger or use Full detail so the facade relief and terrace openings stay crisp.
- One piece with the ground
Lyra NYC Apartments is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Lyra NYC Apartments takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Lyra NYC Apartments
Lyra NYC is a residential rental tower at 555 West 38th Street in New York. It rises 52 stories and contains 598 units. Pelli Clarke & Partners designed the building, with SLCE Architects as executive architect, and Rockrose Development Corporation is the owner and developer. Construction started in 2019 and was completed in 2022.
The project covers 407,000 square feet in New York and is described as residential rental housing. The building's official description also notes a double-height lobby that opens into a solarium and lounge, and describes the tower as offering residences and amenities.
About this model
Lyra NYC Apartments is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
