3D print the Mercedes-Benz Museum
A free, printable 3D model of the Mercedes-Benz Museum in Stuttgart, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 48 m
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
48 m of the Mercedes-Benz Museum, 14 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print size for the shell
A larger print gives the museum's walls and roof edges more room to read clearly. Print friendly adapts small parts; Full detail keeps every modeled feature.
- Layers for clean edges
Use 0.12 to 0.16 mm layers to keep the building's corners and roof edge crisp.
- One piece with the ground
The Mercedes-Benz Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mercedes-Benz Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mercedes-Benz Museum
An automobile museum in Stuttgart, Germany, the Mercedes-Benz Museum traces the history of that brand and the brands linked with it. The Mercedes-Benz brand and the group's international headquarters are both based in Stuttgart. The present building sits just outside the Daimler factory's main gate. UNStudio designed it, and it opened on May 19, 2006.
Three overlapping circles, with the middle taken out, make a cloverleaf plan; the resulting triangular atrium is meant to bring a Wankel engine to mind. The height and a double-helix inner layout were chosen to make the most of the space: 16,500 square meters (178,000 sq ft) of exhibition area fit on a 4,800 square meter (52,000 sq ft) footprint. That helix suits the displays, which divide between legend rooms and collections, and the two routes can meet at any point.
HG Merz, who designed the exhibition, was hired before the 2001 architecture competition, so building and displays are closely tied. More than 160 vehicles are kept here, some from the earliest years of the motorcar engine, and the Fellbach-based Mercedes-Benz Classic Center looks after them. Audio tours come free in several languages, and visitors may also tour the Untertürkheim engine factory nearby.
About this model
The Mercedes-Benz Museum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
