3D print the Porsche Museum
A free, printable model of the Porsche Museum in Stuttgart, with its exhibition building and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Large wall surfaces
Broad wall faces and the roofline are the main surfaces to watch. A larger print keeps their edges crisp, and 0.12–0.16 mm layers help vertical faces.
- Detail at the print scale
Print friendly adapts small architectural details to the print scale; Full detail is better for a large print or a finer nozzle.
- One piece with the ground
The Porsche Museum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Porsche Museum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Porsche Museum
The Porsche Museum is a museum of automobiles in Stuttgart's Zuffenhausen district, Germany, on the site of the carmaker Porsche. Among Stuttgart's most visited museums it ranks second, after the Mercedes-Benz Museum. The original museum opened in 1976 beside a road by the Porsche factory; it was a small works museum with room for around 20 exhibits, shown in rotation.
After Stuttgart's new Mercedes-Benz Museum opened in eastern Stuttgart in 2006, Porsche extended its own museum in northern Zuffenhausen, next to the company headquarters. Concept work had begun in 2003. Costs were first put at 60 million euros, but just before the official opening ceremony in 2009, the final figure was confirmed at 100 million euros.
The new building stands at a conspicuous junction beyond the Porsche headquarters. Its display area covers 5,600 square meters and holds over 80 exhibits, including many rare cars and historical models. Delugan Meissl Associated Architects designed the museum, and HG Merz designed the exhibition spaces. Construction began on October 17, 2005, and the building was handed over on December 8, 2008. It officially opened on January 28, 2009. Above the basement, a 35,000-ton exhibition building called the Flieger rests on three cores and spans up to 60 meters.
About this model
The Porsche Museum is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
