3D print the Metrobank Center
Generate a free, printable 3D model of the Metrobank Center in Bonifacio Global City, with its tower and complex among the surrounding city, built from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Metrobank Center in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 318 m
- On a 160 mm print
- 87 mm
- Scale
- 1:3,750
318 m of the Metrobank Center, 87 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- The crown and thin mast
The stepped crown ends in a slender mast, the finest point on the model. Print larger or choose Full detail, and slow the top layers so the taper stays sharp.
- Vertical fins and floor bands
Long projecting fins and closely spaced floor joints run down the tower. Layers of 0.12 to 0.16 mm help that vertical relief stay readable.
- One piece with the ground
The Metrobank Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Metrobank Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Metrobank Center
The Metrobank Center, once called the Federal Land Tower, is a mixed-use supertall skyscraper of 66 stories in Taguig, Metro Manila, within the Bonifacio Global City district. Its 318 m (1,043 ft) pinnacle makes it the tallest structure in the Philippines. The PBCom Tower, the earlier record holder, is exceeded by 59 m (194 ft); the roof sits at about 259.1 m (850 ft).
The developer, Bonifacio Landmark Realty and Development Corporation, is a joint venture of Federal Land, Inc. and ORIX Corporation. The tower is part of the Grand Central Park complex. There, a shared podium joins it to the 45-story Grand Hyatt Residences; the Grand Hyatt Residence South Tower, another residential block in the complex, reaches 50 stories. The Grand Hyatt Manila hotel occupies the top 25 floors and has 461 guest rooms.
Wong & Ouyang and Casas + Architects served as the project's architectural firms. The wind, structural and seismic engineering came from Ove Arup & Partners. Arup's damp outrigger system places concrete outrigger walls in the building's two mechanical floors to resist both seismic shock and wind.
About this model
The Metrobank Center is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
