3D print the Mevlana Mosque, Rotterdam
A free, printable model of the Mevlana Mosque in Rotterdam, with the surrounding city generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 34 m
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
34 m of the Mevlana Mosque, Rotterdam, 9 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin vertical details
Tall, thin vertical parts are the first to suffer at small sizes. Print friendly adapts them to the print scale; Full detail keeps every modeled feature for a large print or a fine nozzle.
- One piece with the ground
The Mevlana Mosque, Rotterdam is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mevlana Mosque, Rotterdam takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Mevlana Mosque, Rotterdam
The Mevlana Mosque is a mosque in northwestern Rotterdam, in the Netherlands, and it serves mainly Turkish-Dutch Muslims. It is also known in Dutch as the Mevlanamoskee and in Turkish as Mevlana Camii. The mosque itself is named after Rumi.
The mosque dates from 2001 and has two minarets. Bert Toorman was its architect, and the building rises 33.8 meters. In 2006 it was voted Rotterdam's most attractive building. The two minarets form part of its design, and the building stands in Rotterdam.
About this model
The Mevlana Mosque, Rotterdam is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
