3D print Euromast
A free, printable model of Euromast and its surroundings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Euromast in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 50 mm
- Scale
- 1:3,750
50 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, slow printing
An observation tower is tall for its footprint. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the vertical detail crisp.
- One piece with the ground
Euromast is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Euromast takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Euromast
Euromast, an observation tower in Rotterdam, Netherlands, was designed by Hugh Maaskant and built from 1958 to 1960 specifically for the 1960 Floriade. It has been a listed monument since 2010. The concrete tower is 9 m (30 ft) across on the inside, and its walls are 30 cm (12 in) thick. A block of concrete weighing 1,900,000 kg sits beneath it, keeping the center of gravity below ground.
A "crow's nest" observation platform sits 96 m (315 ft) above ground, along with a restaurant. At first the tower was 101 m (331 ft) tall, the tallest building in Rotterdam. Erasmus MC's high-rise (113.5 m, 372 ft), completed in 1968, took the title from it. The Space Tower, added to the top in 1970, gave an additional 85 m (279 ft) and returned the title to Euromast.
Euromast was the highest building in the Netherlands until De Zalmhaven, also in Rotterdam, surpassed it in 2021. The World Federation of Great Towers counts Euromast as a member. An extreme sports event featuring BASE jumping took place at the tower in 2008, 2009 and 2019.
About this model
Euromast is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
