A white 3D print of the Monument to the Revolution, a four-legged arch with a ribbed dome and corner sculptures, standing on an open plaza among city streets.

Monument to the Revolution in 3D

The Monument to the Revolution appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Monument to the Revolution model, North view North
  • Monument to the Revolution model, East view East
  • Monument to the Revolution model, South view South
  • Monument to the Revolution model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Monument to the Revolution may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
67 m
On a 160 mm print
18 mm
Scale
1:3,750

67 m of the Monument to the Revolution, 18 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Sculpture groups on the corners

    Small figure groups sit on each corner above the arches. A bigger print size keeps them recognizable, and Full detail keeps every modeled figure; Print friendly adapts them to the print scale.

  2. Ribbed dome and lantern

    The ribbed dome and its small lantern top the tallest part of the model. Layers of 0.12 to 0.16 mm keep the ribs crisp, and slower printing with good cooling helps the lantern.

  3. One piece with the ground

    The Monument to the Revolution is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Monument to the Revolution takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Monument to the Revolution

The Monument to the Revolution (Monumento a la Revolución) is an arch in memory of the Mexican Revolution, standing in the Plaza de la República in downtown Mexico City near two major avenues, Avenida de los Insurgentes and Paseo de la Reforma. At 67 m (220 ft), no triumphal arch in the world is taller. It also serves as a mausoleum for key figures of the Revolution.

It began as the Palacio Legislativo Federal, meant to house both chambers of congress under President Porfirio Díaz. French architect Émile Bénard designed it in a neoclassical style with an iron frame, and in 1910 Díaz laid its first stone. The facade was to use Italian marble and Norwegian granite. Francisco I. Madero kept the work going after Díaz fell in 1911, but the project was abandoned after Madero's murder in 1913.

The shell stood unfinished for twenty-five years. Under President Lázaro Cárdenas, Mexican architect Carlos Obregón Santacilia proposed reusing the abandoned dome as a monument honoring the Revolution's heroes, built over the existing cupola in an eclectic mix of Art Deco and Mexican socialist realism. Four stone sculpture groups were designed by sculptor Oliverio Martínez, and work was completed in 1938. Buried there are Madero, Venustiano Carranza, Pancho Villa, Plutarco Elías Calles and Cárdenas.

About this model

The Monument to the Revolution is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Mexico City

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits