3D print the Morelli House
A free, printable model of Morelli House, a low house with wide overhanging roofs and lattice walls, and the lots and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Morelli House
Morelli House stands at 861 East Bridger Avenue in Las Vegas, Nevada. It dates from 1959 and is a textbook example of mid-century modern design. The house has a listing on the National Register of Historic Places, as well as city and state registers. It was originally at 52 Country Club Drive, inside the Desert Inn Country Club, and it was moved to its Bridger Avenue address in September 2001. Its designation as a landmark followed that move.
The house is famous as the home of Antonio Morelli, who led the band and conducted the music at the Sands Hotel, and of Helen, his wife, in the Rat Pack's heyday, the 1950s and 60s. Over three decades it was where big names in entertainment gathered after hours, among them Judy Garland, Nat King Cole, Tony Bennett, Dean Martin, Sammy Davis Jr. and Frank Sinatra. Morelli was very active in the music scene in Nevada, and the couple were also very active in charitable causes.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 1 mm | 1:3,750 |
| 200 mm | 2 mm | 1:3,000 |
| 256 mm | 2 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Lattice screen walls
- Fine diamond-shaped lattice fills parts of the walls. Print friendly adapts it to the print scale; Full detail keeps it on a larger print or with a fine nozzle.
- Wide, thin roofs
- The roofs are wide, flat slabs that overhang the walls. A larger print size keeps their thin edges clear, and layers of 0.12 to 0.16 mm keep the edges crisp.
- One piece with the ground
- The Morelli House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Morelli House takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Morelli House is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Morelli House STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Morelli House grows with the print: about 1 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
