A white 3D print of the Mosque of the Martyrs, a domed mosque with two tall pointed minarets on a paved plaza, among green areas and winding paths.

Mosque of the Martyrs in 3D

The Mosque of the Martyrs appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Mosque of the Martyrs model, North view North
  • Mosque of the Martyrs model, East view East
  • Mosque of the Martyrs model, South view South
  • Mosque of the Martyrs model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Mosque of the Martyrs may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Twin pointed minarets

    Two tall, tapering minarets with pointed tips rise at the corners. Print friendly adapts them to the print scale; Full detail keeps them on a larger print. Print slowly so the thin tips can cool.

  2. Ribbed dome

    The central dome has fine ribs and a small finial. A layer height of 0.12–0.16 mm keeps the ribs crisp.

  3. One piece with the ground

    The Mosque of the Martyrs is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Mosque of the Martyrs takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Mosque of the Martyrs

The Mosque of the Martyrs, officially the Alley of Martyrs' Mosque, is a Sunni Islam mosque in Baku, the capital of Azerbaijan. It stands in Baku's Upland Park district, close to Martyrs' Lane, which is also called the Alley of Martyrs. It also goes by the names Turkish Mosque and Shahid's Mosque.

Work began in the early 1990s, helped by the Turkish government, and ended in 1996. Repairs were finished in 2007. Verse 154 of the Al-Baqara chapter of the Quran is written on the facade in Arabic and Turkish. In English it reads roughly as an instruction not to call anyone dead who died for Allah, and states that they are alive.

About this model

The Mosque of the Martyrs is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Baku

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits