3D print the Beyler Mosque
A free, printable model of the Beyler Mosque, with its tall minaret and dome, and the narrow lanes and buildings of the Old City around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Beyler Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 25 m
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
25 m of the Beyler Mosque, 8 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender minaret
The tall thin minaret with its balcony and capped top is the most delicate part. Use Full detail with a larger print, or Print friendly at small sizes, and print slowly with good cooling for the upper part.
- Dome and carved portal
The ribbed dome and the carved portal are fine surface details. Layer heights of 0.12–0.16 mm keep them crisp.
- One piece with the ground
The Beyler Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Beyler Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Beyler Mosque
The Beyler Mosque, once a Shia place of worship, is a historic monument inside the Old City of Baku, Azerbaijan, across from the Murad Gate at the Shirvanshah Palace Complex. It was built in 1895, and it was the final mosque constructed in the İcherisheher. It got its name because the famous beys, or noblemen, of Baku commissioned it. The architect was Seyid Hüseyn.
The sons of Muhammad Hashim Al-Bakui, Haji Baba and Haji Javad, helped pay for the construction, together with the millionaire Murtuza Mukhtarov. During the Soviet period the mosque was closed for worship and turned into a sports hall. It was restored in 2014 and 2015, and the Museum of Sacred Relics opened inside in 2016 with ancient Qurans.
The prayer hall is distinguished from other religious monuments by its size, and its three-nave layout follows the three-nave basilicas common in churches. Its minaret rises 25 m (82 ft), and the upper part carries ornament typical of the Western European style.
About this model
The Beyler Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





