3D print the Municipal House
A free, printable model of the Municipal House and the surrounding streets and buildings in Prague, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Municipal House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Dome and ornament
The building has a dome and an exterior with allegorical art and stucco. Print friendly adapts small details to the print scale; a larger print or Full detail keeps more of the ornament.
- One piece with the ground
The Municipal House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Municipal House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Municipal House
Municipal House, or Obecní dům in Czech, is a civic building in Prague, Czechia, and the home of Smetana Hall, a celebrated concert venue. It stands on Náměstí Republiky beside the Powder Gate, in central Prague. Art Nouveau is its architectural style, and the exterior carries allegorical art and stucco.
A Royal Court palace once stood on the site; King Wenceslas IV had it built around 1380. The Kings of Bohemia resided there between 1383 and 1485, after which it was abandoned, and the palace was pulled down early in the 20th century. Work on the current building began in 1905 to designs by Osvald Polívka and Antonín Balšánek, and it opened in 1912. The Czechoslovak declaration of independence was made here in 1918.
Karel Špillar's mosaic Homage to Prague is over the entrance, flanked by allegorical sculpture groups by Ladislav Šaloun. Smetana Hall works as both concert hall and ballroom. The building has a glass dome, and works by Max Švabinský, Alfons Mucha and Jan Preisler are kept inside.
About this model
The Municipal House is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
