3D print the Museum of Russian Art, New Jersey
A free, printable model of the Museum of Russian Art, a small four-story building with a detailed facade, set beside a park and large apartment buildings, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Museum of Russian Art, New Jersey
Located in Jersey City, New Jersey, the Museum of Russian Art (known as MoRA) is devoted to showing Russian art, with a particular focus on Soviet Nonconformist Art. The museum's home is a historic brownstone building in the Paulus Hook area.
The museum was established in 1980 as the CASE Museum of Contemporary Russian Art, a name that included an abbreviation. Its historic brownstone building in Paulus Hook went through a renovation, and the museum re-opened there in 2010 after that work was done.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 10 mm | 1:3,750 |
| 200 mm | 13 mm | 1:3,000 |
| 256 mm | 17 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A small, finely detailed facade
- The building is small, with many window frames and ornament on its front. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print and 0.12 to 0.16 mm layers.
- One piece with the ground
- The Museum of Russian Art, New Jersey is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Museum of Russian Art, New Jersey takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Museum of Russian Art, New Jersey is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Museum of Russian Art, New Jersey STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Museum of Russian Art, New Jersey grows with the print: about 10 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
