3D print Nanjing Financial City II Tower C1
A free, printable model of Nanjing Financial City II Tower C1, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 417 m
- On a 160 mm print
- 112 mm
- Scale
- 1:3,750
417 m of Nanjing Financial City II Tower C1, 112 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very tall tower
At this height, print larger so the upper floors keep their detail, use 0.12–0.16 mm layers, and slow the print near the top for a clean finish.
- Landmark detail setting
Full detail keeps every modeled feature and suits a large print or a fine nozzle; Print friendly adapts thin parts and small details to the print scale.
- One piece with the ground
Nanjing Financial City II Tower C1 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Nanjing Financial City II Tower C1 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Nanjing Financial City II Tower C1
Nanjing Financial City II forms a mixed-use tower group in Nanjing's Jianye District, in Jiangsu Province, China. It was built between 2019 and 2025 and consists of five towers. The tallest, Tower C1, reaches 416.6 m (1,367 ft) across 88 floors and serves as an urban landmark. It topped out in January 2024.
The complex was built in two phases. GMP Architects designed the second phase, which covers 798,000 square meters in all. In Plot C, Gerkan, Marg and Partners planned two prominent towers: one of 186 m mainly for serviced apartments, and the supertall Tower C1 with a mix of uses. C1 covers 171,500 m2, or 1,850,000 sq ft, divided into five office units of nine stories each; above them, levels 61 to 80 hold a five-star hotel with 250 rooms and 51,000 m2, or 549,000 sq ft.
About this model
Nanjing Financial City II Tower C1 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
